Home » Products and Systems » Control Equipment » Control Equipment for Surface Mounting

Control Equipment for Surface Mounting

	Befehlsgerätesystem Reihe ConSig 8040 Explosion protection according to CENELEC IEC NEC For use in Zone 1 and Zone 2 Zone 21 and Zone 22 Standard and customized units 3 sizes available Enclosures in glass fibre reinforced polyester resin Up to 3 insertion points available per individual unit Control unit with 4 insertion points, see under control stations series 8146, enclosure 8146/.24. Individual units can be combined into larger units Options: flanges in brass or moulded material metal plates where metal cable entries are used equipment identification plate can be attached Contact elements 8082 and 8208 with SIL certificates On request with contact element 8208 for extra low currents, with open-circuit and short-circuit monitoring
	Control Unit System Series ConSig 8040 Equipped with Contact Block 8208 Explosion protection to CENELEC IEC NEC Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Enclosures 3 sizes available enclosures in glass fibre reinforced polyester resin Contact blocks available in forms 1 NO and 1 NC 2 NC 2 NO all NC contacts spring loaded with positive drive all versions with gold-contacts can be used for safety instrumented functions up to SIL 2 and SIL 3 to IEC/EN 61508 all versions with internal resistors for open-circuit and short-circuit detection Actuators in 6 different forms pushbutton mushroom button selector switch with rotary actuator (2 switching positions) mushroom stay-put button with key lock mushroom stay-put button
	Control Unit System Series ConSig 7040 Explosion protection to CENELEC IEC NEC For use in Zone 21 and Zone 22 Standard and customized units 3 sizes available Enclosures in glass fibre reinforced polyester resin Up to 3 insertion points available per individual unit Individual units can be combined into larger units Options: flanges in brass or moulded plastic metal plates where metal cable entries are used equipment identification plate can be attached
	Push Button Series TEF 1107 For use in Marine application Safe area Switch for light signals, horns or machines
	Control Station in Polyester Resin Series 8146 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Zone 21 and Zone 22 Enclosures in glass fibre reinforced polyester resin 8 basic enclosure sizes Different enclosure heights Options: flanges cover hinges flanged enclosure brass plates for metal cable entries Can be combined to larger units Equipped with built-in units for snap-in fitting control units indicating lamps illuminated buttons control switches ammeters voltmeters
	Control Station in Sheet Steel or Stainless Steel Series 8125 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Zone 21 and Zone 22 Enclosures in galvanized sheet steel or stainless steel 6 basic enclosure sizes Different enclosure heights Options: flanges cover hinges Can be combined to larger units Equipped with built-in units for snap-in fitting control units indicating lamps illuminated buttons control switches ammeters voltmeters Contact blocks 8082 and 8208 with SIL certificates
	Fire Alarm Station Series 8146/5052 Explosion protection to CENELEC IEC Can be used in Zone 1 and Zone 2 Colour red (RAL 3000) Enclosure in polyester resin 3 alternatives available Alarm station 8146/5052-C796 Mushroom stay-put button with manual contact. Continuous alarm by pressing automatically locking alarm button Alarm station 8146/5052-C797 Mushroom stay-put key release with manual contact. Continuous alarm by pressing automatically locking alarm button Alarm station 8146/5052-C814 Automatic contact as alarm button springs out when glass window broken. An 8208 resistance module can be retro-fitted to protect against short-circuit and monitor for open-circuit
	Control Button Series 8082 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Contact element available in 2 forms with 1 NO contact with 1 NC contact, spring loaded Contact material available in silver-nickel or gold-plated Actuators in 9 different forms pushbutton mushroom button selector switch rotary actuator key-operator switch key-operator button mushroom stay-put button with key lock mushroom stay-put button mouble pushbutton actuator Connection type screw terminal cage clamp terminal Control switch and key switch: the functions "latching/spring return" and/or "key not removabel" can be coded at the already installed actuators on site
	Indicating Lamp Series 8010 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Low heat build-up Very long life Maintenance-free Available in: red, yellow, green, blue, white Available forms Ex e Ex i
	Illuminated Pushbutton Series 8082/8010 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Contact element and indicating lamp combined below one actuator Control and indicator function in one location Switching and indicatior functions independent of each other Colours: red, yellow, green, blue and clear Rated voltage 12 V - 10 % ... 254 V + 6 %
	Control Switches Series 8008 Explosion protection to CENELEC IEC Can be used in Zone 1 and Zone 2 Up to 4 poles Versions Control sitches 2-, 3-, 4-poles Load switch 3-poles + auxiliary contact NO contacts spring-loaded, suitable for EMERGENCY STOP functions In latching or spring-return form
	Contact Block Series 8208 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Available contact blocks 1 NO and 1 NC 2 NC 2 NO All NC contacts spring loaded with positive drive All versions with gold-contacts All versions with internal resistors for open-circuit and short-circuit detection Can be used for safety instrumented functions up to SIL 2 and SIL 3 to IEC / EN 61508 Actuators in 8 different forms pushbutton mushroom button selector switch rotary actuator key-operator switch key-operator button mushroom stay-put button with key lock mushroom stay-put button
	Potentiometer Series 8208 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Resistance values from 100 Ω up to 4,7 MΩ
	Ammeter / Voltmeter Series 8402, 8403, 8405, 8404 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 Fast comparison of measured with set values Versions available Ammeter Series 8405, Series 8403 and Series 8402 Voltmeter Series 8404
	Resistor Series 8453/1 and 8453/2 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 The resistor element is equipped with 1 resistor 1 kΩ / 1 W 1 resistor 10 kΩ / 1 W Depending on the kind of order, the control units Series 8453 can be equipped with fuses varistors diodes capacitors and other electrical / electronic components
	Digital indicator module Series 8411 Explosion protection to CENELEC IEC For use in Zone 1 and Zone 2 The modules can be combined together
	Earth Conductor Bushing Series 8195 Explosion protection to CENELEC IEC Can be used in Zone 1 and Zone 2 Zone 21 and Zone 22 Type of protection "increased safety" fixed installation Connection cross-section