Language

Print

Control Equipment for Surface Mounting

Radio Control Devices Series 8040
Radio Control Devices Series 8040
  • Energy self-sufficient, no power supply or wiring necessary
  • EnOcean protocol
  • For 868 MHz
  • Data rate 120 kbps
  • Multinetwork capable
  • Easy programming on the receiver's side
  • Available with pushbutton, mushroom pushbutton and rotary actuator
  • Enclosure made of glass fibre reinforced polyester resin
Radio receiver Series G053/11
Radio receiver Series G053/11
  • Radio receiver
    • 1 channel with potential-free relay or NPN / PNP output
  • EnOcean protocol
  • Transmitter / receiver assignment via teach-in mode
  • Modular installation housing for a quick snap-on mounting on DIN rails
Radio receiver Series G053/14
Radio receiver Series G053/14
  • Radio receiver
    • 4 channel with potential-free relay outputs
  • EnOcean protocol
  • Transmitter / receiver assignment via teach-in mode
  • Modular installation housing for a quick snap-on mounting on DIN rails
Radio repeater Series G053/21
Radio repeater Series G053/21
  • Radio receiver
  • Radio repeater for extension of the radio range
  • EnOcean protocol
  • LEDs for telegram acknowledgement of receipt
  • SMA socket for externally connectable antenna
  • Modular installation housing for a quick snap-on mounting on DIN rails
Control Device System Series ConSig 8040
Control Device System Series ConSig 8040
  • Enclosure made of glass fibre reinforced polyester resin
  • Modular design
  • 3 sizes available
  • Individual units can be combined into larger units
  • Standard and customer-specific versions
  • With contact elements 8208 for open-circuit and short-circuit monitoring
  • Versions with contact elements 8082 and 8208 for use up to SIL 2 and SIL 3, respectively
ATEX / IECEx NEC 505 NEC 506 NEC 500
Class I Class I Class II Class III
Zone 0 1 2 20 21 22 Zone 0 1 2 20 21 22 Division 1 2 1 2 1 2
For use x x x x For use in x x For use in x x x x
Control Unit System Series ConSig 8040 Equipped with Contact Element 8208
Control Unit System Series ConSig 8040 Equipped with Contact Element 8208
  • Enclosures made of glass fibre reinforced polyester resin
  • Contact element 8208 available with
    • 1 NO and 1 NC, with positive drive
    • 2 NC, with positive drive
    • 2 NO
  • All versions with gold contacts
  • 5 different actuators
    • Pushbutton, mushroom pushbutton
    • Selector switch with rotary actuator
    • Mushroom stay-put button (key lock, key release), mushroom stay-put button
  • Internal resistors for open-circuit and short-circuit detection
  • suitable for safety-specific applications up to SIL 2 and SIL 3 to IEC/EN 61508
ATEX / IECEx Class I (NEC 505) (NEC 506) Class I Class II Class III
Zone 0 1 2 20 21 22 Zone 0 1 2 20 21 22 Division 1 2 1 2 1 2
For use x x x x For use in x x For use in x x x x
Control Device System Series ConSig 8040
Control Unit System Series ConSig 7040
Control Unit System Series ConSig 7040
Control Unit System Series ConSig 7040
  • For use in areas subject to dust explosion hazards
  • Enclosures in glass fibre reinforced polyester resin
  • Modular design
  • 3 sizes available
  • Individual units can be combined into larger units
  • Standard and customer-specific versions
  • Versions with contact G082 for use up to SIL 3
ATEX
Zone 0 1 2 20 21 22
For use in x x
Control Stations in Sheet steel or Stainless Steel Series 8125
Control Stations in Sheet steel or Stainless Steel Series 8125
  • Enclosure in electropolished stainless steel 1.4404 (AISI 316L) or zinc-galvanised sheet steel painted
  • 6 basic enclosure sizes with different enclosure heights
  • Can be combined to larger units
  • Equipped with built-in devices for snap-on mounting
    • Control devices
    • Indicating lamps
    • Illuminated pushbuttons
    • Control switches
    • Ammeters
    • Voltmeters
  • Optionally available with:
    • Flanges
    • Cover hinges
  • Contact blocks 8082 and 8208 with SIL certificates
ATEX / IECEx Class I (NEC 505) (NEC 506) Class I Class II Class III
Zone 0 1 2 20 21 22 Zone 0 1 2 20 21 22 Division 1 2 1 2 1 2
For use x x x x For use in x x For use in x x* x x x
Control and Distribution Boxes Made of Stainless Steel Series 8150
Control and Distribution Boxes Made of Stainless Steel Series 8150
  • Circumferential protection channel prevents water entry
  • Extended temperature range due to high-quality seal materials
  • Optionally with hinges / cam locks or screw-on cover
  • Hinge versions with large opening angle 130°
  • Flange plates tightened from the outside enables simple installation
  • Standard sizes on stock
  • Special sizes on request
ATEX / IECEx
Zone 0 1 2 20 21 22
For use in x x x x
Control Stations Made of Polyester Resin Series 8146
Control Stations Made of Polyester Resin Series 8146
  • Enclosures made of glass-fibre reinforced polyester resin
  • 8 basic enclosure sizes with various enclosure heights
  • Can be combined to larger units
  • Equipped with built-in devices for snap-on mounting
    • Control devices
    • Indicating lamps
    • Illuminated pushbuttons
    • Control switches
    • Ammeters
    • Voltmeters
  • Options available with:
    • Flanges
    • Cover hinges
    • Flange enclosures
    • Brass plates, Metal cable glands
ATEX / IECEx NEC 505 NEC 506 NEC 500
Class I Class I Class II Class III
Zone 0 1 2 20 21 22 Zone 0 1 2 20 21 22 Division 1 2 1 2 1 2
For use x x x x For use in x x For use in x x* x x x