 |
Terminal Boxes Series 8150
- Explosion protection according to
- For use in
- Zone 1 and Zone 2
- Zone 21 and Zone 22
- Wide product range
- Enclosures made of stainless steel, brush finished
1.4301 (AISI 304) or 1.4404 (AISI 316L) - Optionally with hinges / cam locks or screw-on cover
- Circumferential protection channel prevents water entry
- External earth connection (M8)
- Flange plate tightened from the outside enables simple installation
- Degree of protection IP66
|
 |
Terminal Boxes Series 8118
- Explosion protection according to
- For use in
- Zone 1 and Zone 2
- Zone 21 and Zone 22
- Marine applications
- Enclosures in glass fibre reinforced polyester resin
- 3 sizes available
- Terminal fitting according to order
- Assembly of cable entries according to order
- Ingress Protection IP66
|
 |
Terminal boxes series 8146
- Explosion protection according to
- For use in
- Zone 1 and Zone 2
- Zone 21 and Zone 22
- Fitting with terminals up to max. 300 mm2
- Enclosure of polyester resin
- 8 basic enclosure sizes with various heights
|
 |
Klemmenkästen Reihe 8125
- Explosion protection according to
- For use in
- Zone 1 and Zone 2
- Zone 21 and Zone 22
- Fitting with terminals up to max. 300 mm2
- Stainless steel enclosures
- 6 basic enclosure sizes with various heights
|
 |
Cable End Boxes Series 8146
- Explosion protection to
- Can be used
- in Zone 1 and Zone 2
- in Zone 22
- Enclosures in glass fibre-reinforced polyester resin
- Installation of terminals from ≥ 35 mm² up to max. 185 mm²
- Rated currents up to max. 400 A depending on enclosure version and size
- Degree of protection IP 55
|
 |
High Voltage Distribution Box Series 8125
- Eplosion protection to
- Can be used in Zone 1 and Zone 2
- Connection of two high voltage cables
- Painted sheet steel enclosure
- Optional stainless steel enclosure, electropolished
- Degree of protection IP 66
- Cable glands fitted to order
- Conductor cross section: 16 mm2 up to 150 mm2
- Voltage up to 10 kV
|
 |
Isolating Terminal Series 8082
- Explosion protection to
- For use in Zone 1 and Zone 2
- For installation in Ex e enclosure
- Connection cross-section: 2.5 mm2 solid / stranded
- Single pole, NC contact, positive opening operation
- Enclosure in polyamide
- For snap-mounting; Screw fixing possible via adaptor
- Buttable to terminal blocks
- Definite ON-OFF position indicator
- When the main contact is open, the incoming line terminal is covered
- Actuator padlockable in OFF-position (acc. IEC / EN 60947-5-1)
|
