|
|
Temperature Transmitter without Output 0/4 ... 20 mA, with Limit Value Contact (Field Circuit Ex i) Type 9182/.0-50-12
- One unit for nearly all temperature sensors indivdually configurable
- Intrinsically safe input [Ex ia] IIC
- 1 and 2 channels
- Galvanic isolation between input, output, power supply and configuration interface
- Open-circuit and short-circuit monitoring and messaging (can be switched off)
- Simple configuration with PC
- Installation possible in Zone 2 and Div. 2
Zones |
0 |
1 |
2 |
20 |
21 |
22 |
Ex i
interfaces |
X |
X |
X |
X |
X |
X |
Installation in |
|
|
X |
|
|
X |
|
|
|
Temperature Transmitter with Output 0/4 ... 20 mA and Limit Value Contact (Field Circuit Ex i) Type 9182/10-51-12
- One unit for nearly all temperature sensors indivdually configurable
- Intrinsically safe input [Ex ia] IIC
- 1 channel
- Galvanic isolation between input, output, power supply and configuration interface
- Open-circuit and short-circuit monitoring and messaging (can be switched off)
- Simple configuration with PC
- Installation possible in Zone 2 and Div. 2
Zones |
0 |
1 |
2 |
20 |
21 |
22 |
Ex i
interfaces |
X |
X |
X |
X |
X |
X |
Installation in |
|
|
X |
|
|
X |
|
|
|
Temperature Transmitter with Output 0/4 ... 20 mA and Limit Value Contact, SIL 2 (Field Circuit Ex i) Type 9182/10-51-14
- One unit for nearly all temperature sensors indivdually configurable
- Intrinsically safe input [Ex ia] IIC
- 1 channel
- Galvanic isolation between input, output, power supply and configuration interface
- Open-circuit and short-circuit monitoring and messaging (can be switched off)
- Simple configuration with PC
- Installation possible in Zone 2 and Div. 2
- Can be used up to SIL 2 (IEC 61508)
Zones |
0 |
1 |
2 |
20 |
21 |
22 |
Ex i
interfaces |
X |
X |
X |
X |
X |
X |
Installation in |
|
|
X |
|
|
X |
|
|
|
Transmitter Supply Unit with Limit Value (Field Circuit Ex i) Type 9162/13-11-12
- Compact trip amplifier with 2 configurable limit values and 0/4 ... 20 mA output
- Suitable for 2- and 3-wire transmitter, 2-wire HART transmitter and mA-sources
- Open circuit and short circuit monitoring and signalisation
- Intrinsically safe input [Ex ia] IIC
- Installation possible in Zone 2
Zones |
0 |
1 |
2 |
20 |
21 |
22 |
Ex i interfaces |
X |
X |
X |
X |
X |
X |
Installation in |
|
|
X |
|
|
X |
|
|
|
Transmitter Supply Unit with Limit Value SIL 2 (Field Circuit Ex i) Type 9162/13-11-14
- Compact trip amplifier with 2 configurable limit values and 4 ... 20 mA output
- Suitable for 2- and 3-wire transmitter, 2-wire HART transmitter and mA-sources
- Open circuit and short circuit monitoring and signalisation
- Intrinsically safe input [Ex ia] IIC
- Installation possible in Zone 2
- Version can be used up to SIL 2 (IEC 61508)
Zones |
0 |
1 |
2 |
20 |
21 |
22 |
Ex i interfaces |
X |
X |
X |
X |
X |
X |
Installation in |
|
|
X |
|
|
X |
|
|
|
Frequency Transmitter (Field Circuit Ex i) Type 9146
- Most compact device in its class, 2 versions available:
- limit value switch, frequency/current conversion, impuls divider function within 17.6 mm width
- dual channel frequency/current conversion within 17.6 mm width
- Line fault detection indicated by LED and potential free relay contact allows easy monitoring and speeds-up troubleshooting
- Broad input frequency range 0.001 Hz ... 20 kHz
- Galvanic isolation between input and output
- Installation possible in Zone 2
| Zones | | 0 | 1 | 2 | 20 | 21 | 22 | Ex i interfaces | X | X | X | X | X | X | Installation in | | | X | | | X |
|
