Handlamps

• By using modern cold cathode tubes extrem long service lifetime
• Suitable as well for machine lighting
• Anti-roll design in the hand grip
• Adjustable light direction via suspension hook
• Life expectancy more than twice of normal fluorescent lamps

• Explosion protection to
  • CENELEC
  • IEC
• For use in
  • Zone 1 and Zone 2
  • Zone 21 and Zone 22
• For incandescent lamps up to 60 W
• Can be supplied with or without fitted connection lead
• Hand grip of soft rubber vulcanized around an aluminium reinforcement
• Wire guard of zinc-coated or plastic-coated steel wire available
• Glass cover resistant to temperature changes

• For use in
  • Zone 0, 1 and 2
  • Zone 20, 21 and 22
• Unique mechanism for switching on
• Ergonomically formed handlamp
• Extrem high luminous intensity

• For use in
  • Zone 1 and Zone 2
  • Zone 21 and Zone 22
• For alkaline batteries
• Can be supplied for use with the following lamps
  • 2.5 V / 0.3 A
  • 3.7 V / 0.3 A
• Continuous and morse operation possible
• Enclosure in polyamide,
  lens in polycarbonate

• For Use in Zones 1, 2, 21, 22
• With or without emergency light function
• Robust, easy-to-maintain design
• 3-position switch
  • Half strength
  • Full strength
  • OFF
• Residual charge indicator
• Deep discharge protection
• Maintenance-free, long-life NiCD battery
• Narrow or wide beam reflectors

• For use in Zone 1 and Zone 2
• Pushbutton ON - Blinking - OFF
• Filament break monitoring of the main lamp, automatic switchover to economy lamp in the case of filament break
• Light duration approx. 7 hours with maintenance-free accu
• Rugged bolt hook on back of hand lamp
• Charging unit for parking the portable lamp for nominal voltage 12 / 24 V DC and 230 V AC (integrated into one unit) with voltage and
  charging current indication
  • for mains operation: Emergency light functions of the parked portable lamp, i.e. the portable lamp lights in the event of mains failure
  • for in-vehicle operation: if the vehicle battery voltage is monitored - automatic switch-off of charging if the vehicle battery "fades"
• Various diffuser colours available

• Versions
  • 6144 for use in Zones 1 and 2, 21 and 22
  • L144 Industrial design
• Push button for one-hand operation on head of lamp ON-BLINKING-OFF
• With powerful Xenon lamp
  • focusing adjustable externally to a concentrated point or wide angle area
  • luminous intensity > 12,000 cd
• Filament breaks monitoring of the main lamp automatic switchover to economy lamp in the case of filament break
• Light duration approx. 3.5 hours with maintenance-free accu
• Microprocessor-controlled charging technology with battery capacity indication by means of five LEDs
• High protection IP 65
• High stability of the portable lamp thanks to pulling out two racks
• Integrated pocket for insertable lenses e. g. diffuser
• Colored insert on the rear side of the lamp head - providing visible "backlight" when the lamp is on
• Insertable engraveable plate made of plastic - alternatively made of brass
• Rugged belt hook made of stainless steel (option)
• Charger unit for parking the portable lamp for nominal voltage 12 V/24 V DC and 230 V AC (integrated into one unit) with voltage and
  charging current indication
  • for mains operation: Emergency light functions of the parked portable lamp, i.e. the portable lamp lights in the event of mains failure
  • for in-vehicle operation: if the vehicle battery voltage is monitored - automatic switch-off of charging if the vehicle battery "fades"

Portable Lamps Series HS6145

• For use in Zone 1 and Zone 2
• Comply with requirements of Fire Department standard DIN 14 462
• Battery state display
• Deep discharge protection
• Open circuit monitor
• Light intensity 15.000 cd after 4 hours use
• NiCd battery, gas-tight
• Charging unit available for
  • stationary installation
  • installation into vehicles

Portable Lamps Series HSL145

• Industrial design without ­explosion protection